Schiit SYS - Getting Connected; Connect First Source; Connect Second Source; Connect to Output

01300101
1 Connect one source to SYS’ “IN 1” RCA jacks,
using high-quality RCA cables. You can use crap
RCA cables too, as long as they work.
2 If you have a second source, connect it to SYS’
“IN 2” RCA jacks, again with RCA cables.
gEttINg cONNEctEd
1
2 3
3 Connect SYS’ “OUT” RCA jacks to your powered
monitors or power amplier, with even more RCA
cables. Yes, you’ll need lots of RCAs.