Schlage BE365 - Interior Thumbturn; Keypad Lever Operation; Lever Keypad; Lever Operation

Used only in emergency situations to unlock the lock. See Key Override on page 7.
Inside Thumbturn
Used to lock or unlock the lock.
Keypad Lever
Models FE575 (Auto Lock) and FE595 (Flex Lock)
Keypad
Located on the outside of the lock.
Used to enter codes for programming and unlocking. See
Programming Guide on page 10 and Locking and Unlocking on page 8 for more information.
Lever
The inside lever can be rotated at any time to retract the latch.
The outside lever can be rotated at any time, but will only retract the latch when the lock is unlocked.
Cylinder
Located on the outside of the lock.
Used only in emergency situations to unlock the lock. See Key Override on page 8.
Thumbturn
FE595 ONLY: Used to put the lock in a locked or unlocked state.