EasyManua.ls Logo

Schlage Ease S1 SMART DEADBOLT User Manual

Schlage Ease S1 SMART DEADBOLT
12 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Quick Start Guide
S1 SMART DEADBOLT
S1 KEYLESS SMART DEADBOLT
Question and Answer IconNeed help?

Do you have a question about the Schlage Ease S1 SMART DEADBOLT and is the answer not in the manual?

Schlage Ease S1 SMART DEADBOLT Specifications

General IconGeneral
BrandSchlage
ModelEase S1 SMART DEADBOLT
CategoryLocks
LanguageEnglish

Summary

Preparing for Installation

Measure Door Hole

Ensure 54mm hole or use drilling template for deadbolt installation.

Adjust Deadbolt Backset

Set deadbolt to 60mm or 70mm backset position while retracted.

Installation Guide

Install Bolt and Test Operation

Fit bolt ensuring UP is up, test smooth operation, keep bolt retracted.

Mount Exterior Assembly

Align exterior assembly, feed tailpiece and cable through the door hole.

Position and Secure Mounting Plate

Position inner plate, thread cable/tailpiece, secure assemblies with screws.

Connect Cable and Install Interior Assembly

Connect cable to PCB, install interior assembly, ensuring correct tailpiece orientation.

Secure Interior Assembly and Reset Lock

Secure interior assembly, test operation, and reset lock to learn door orientation.

Safety Warnings and Care

Battery Installation and Product Safety

Install batteries only after complete installation; follow instructions to avoid damage.

Door Preparation and Alignment

Accurate door prep is critical for function and security; misalignment degrades performance.

Finish Care Instructions

Clean with a soft, damp cloth; avoid harsh chemicals that damage coating.

Product Definitions

Auto Lock

Automatically re-locks 30 seconds after unlocking if enabled.

Away Mode

Disables user codes, triggers alarm if lock is tampered with when activated.

Fake PIN Code

Random digits added before or after PIN to prevent exposure.

Manual Mode

Lock/unlock via keypad press or internal thumb turn.

Master PIN Code

Used for programming and feature settings.

Reset Button

Resets lock to factory defaults, deleting all user credentials.

Shutdown Time

Lock enters shutdown after exceeding wrong code entry limit.

Silent Mode

Disables the lock's audible tone sound.

Status Indicators

Located on the exterior assembly, indicates lock status.

User PIN Code

Operates the lock; up to 20 codes can be stored.

Lock Operation Procedures

Change Master PIN Code

Procedure to change the master PIN code using the keypad.

Add User PIN Code

Procedure to add new user PIN codes via master PIN.

Delete User PIN Code

Procedure to remove existing user PIN codes.

Manage Beeper Settings

Enable or disable the lock's audible beeper.

Manage Auto Lock Setting

Enable or disable the automatic re-locking feature.

Activate Away Mode

Enable Away Mode for increased security.

Manage Bluetooth Connectivity

Enable or disable the Bluetooth function.

Setting and Using PIN Codes

PIN Code Requirements and Restrictions

Master/User PINs are 4-10 digits; lists forbidden number combinations.

Unlock the Door

Instructions for unlocking the door from outside (PIN/key) and inside (thumb turn).

Lock the Door

Instructions for locking the door from outside (auto/manual) and inside (manual).

Advanced Features and Support

Unlock with Fake PIN Code

Use random digits before or after PIN to prevent exposure from onlookers.

Mobile Access with Schlage Abode

Download the Schlage Abode app for enhanced control and access.

Emergency Power Option

Use Micro USB port and power bank for emergency access if batteries are depleted.

Warranty Information

Provides a 2-year warranty and details consumer rights for replacements or refunds.

Related product manuals