Service Manual L
137
Finishes
Schlage Lock products are available in a range of durable, top quality finishes. Most are available with a clear coating
that protects against damaging environmental factors, including sea air, high humidity, or corrosive vapors.
Cleaning and care varies by finish. Clear-coated or oil rubbed finishes can be cleaned periodically with a mild
non-abrasive soap and buffed lightly with a clean cloth. Non-clear coated finishes should not be cleaned with soaps or
solvents. They require cleaning with a clean, soft, damp cloth. Contact Schlage Technical Services for additional
information on the care of finished hardware.
Finishes are coded according to the Builders Hardware Manufacturers Association (BHMA). The nearest old U.S.
equivalent code designations are shown in parentheses.
Finish Codes and Descriptions
For finish availability refer to Schlage Commercial Price Book.
Code Description
605 (US 3) Bright Brass, clear coated
606 (US 4) Satin Brass, clear coated
609 (US 5) Antique Brass, clear coated
610 (US 7) Bright Brass, Blackened, clear coated
611 ((US 9) Bright Bronze, clear coated
612 (US 10) Satin Bronze, clear coated
613 (US 10B) Oil Rubbed Bronze, no coating
616 (US 11) Antique Bronze, clear coated
619 (US 15) Satin Nickel, clear coated
625 (US 26) Bright Chromium Plated, no coating
626 (US 26D) Satin Chromium Plated, no coating
629 (US 32) Bright Stainless Steel, no coating
630 (US 32D) Satin Stainless Steel, no coating
To Next Page
Loading...
Need help?
General
