Need help?Do you have a question about the Schlage S-6800 and is the answer not in the manual?
General| PIN Length | 4-12 digits |
|---|---|
| RFID Technology | MIFARE |
| Power Source | 4 x AA batteries |
| Material | Zinc Alloy |
| Handing | Reversible |
| ANSI Grade | Grade 1 |
| Access Method | Card, Key |
| Emergency Power | 9V battery |
| Operating Temperature | -20°C to 66°C |
| Finish | Satin Nickel |
| Backset | 60 mm |
| Strike | Standard |
| Keyway | Schlage C Keyway |
| Construction | Heavy Duty |
| Door Thickness | 1-3/8" to 1-3/4" (35mm to 45mm) |
Offers PIN code, fingerprint, and smart card/fob entry, with key override.
Allows random number input before PIN for enhanced privacy.
Enables individual registration and deletion of smart cards/fobs.
Facilitates quick exits by opening the door with a simple lever action.
Features a reliable mechanical mortice lock for durability.
Automatically locks the door after closing or if left unlocked.
Prevents outside access when activated, even with valid credentials.
Sounds an alarm and suspends lock function if excessive force is detected.
Suspends lock function and sounds alarm after multiple incorrect entry attempts.
Provides visual and audible alerts for low battery status.
Disassembly may damage the product and void the warranty.
Keep product away from liquids; remove batteries immediately if exposed.
Check batteries for leaks; replace if found and wash affected skin.
Do not clean with flammable materials; they can damage or cause fire.
Avoid heat sources or water submersion to prevent leaks or explosions.
Do not allow battery electrodes to contact metals; risk of damage.
Do not close the door with the deadbolt locked; may cause damage.
Do not mix old/new batteries or mix types; risk of leaks/explosions.
Lists and identifies parts of the front lock assembly.
Lists and identifies parts of the back lock assembly.
Details on the mortice lock, strike plates, and screws.
Lists batteries, handle shafts, card/fob, and user manual.
Identifies keypad, fingerprint sensor, card/fob plate, handle, etc.
Details battery indicator, status indicator, and power supply ports.
Identifies battery cover, buttons, switches, and handle.
Details battery compartment, R/C button, and low voltage indicator.
Steps to check battery level using the keypad.
Instructions for opening cover and replacing batteries.
Information on battery life factors and recommendations.
How to use a 9V battery for temporary access.
Procedure for using the physical key override.
Method to enter random numbers before the PIN for privacy.
How to activate auto-locking or manual locking modes.
Steps to unlock using a PIN code.
Steps to unlock using a registered card or fob.
Steps to unlock using a registered fingerprint.
How to unlock the door with audio feedback muted.
Door locks automatically after closing.
Locking the door manually via the manual lock button.
How to open the door from the inside using the handle.
How to lock the door from the inside in auto or manual modes.
Steps to activate privacy mode, preventing outside unlocking.
Details on how privacy mode functions and its limitations.
How the door automatically locks when closed.
How the door re-locks if not opened after unlocking.
Triggers for alarm: incorrect PINs, unregistered card/fob, fingerprint attempts.
Alarm triggered by attempts to force the door or lock open.
Step-by-step guide to reset the unit to its original factory settings.
Instructions on how to adjust the sound volume levels.
Explanation of Normal Mode and Safety Mode.
Procedure to switch the lock from Normal to Safety Mode.
Procedure to switch the lock from Safety to Normal Mode.
Steps to register new PIN codes in Normal Mode.
Optional step to add more PIN codes.
How to add new cards or fobs in Normal Mode.
How to remove existing cards or fobs in Normal Mode.
Steps to enroll fingerprints in Normal Mode.
How to remove all enrolled fingerprints in Normal Mode.
Method for registering fingerprints without the front cover.
Steps to add user PIN codes in Safety Mode.
Optional step to register additional user PIN codes.
How to enroll cards or fobs in Safety Mode.
Procedure to assign a registration number to cards/fobs.
How to remove all registered card and fob data.
How to remove specific card or fob entries.
Steps to enroll fingerprints when in Safety Mode.
Process to add additional fingerprints after initial registration.
How to remove all enrolled fingerprint data.
How to remove specific fingerprint entries.
Process for creating temporary PINs usable in Safety Mode.
Steps to change the manager's PIN code.
Procedure to register or replace manager cards/fobs.
To Next Page