EasyManuals Logo

Schlage Touch FE695 Lever User Manual

Schlage Touch FE695 Lever
13 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
*P516-866*
P516-866
Prepare for Installation
Tools Needed
Phillips screwdriver, #1
and #2 bits
Tape Measure
Pencil
Optional
Flathead Screwdriver
Wood Block
Hammer
IMPORTANT NOTES
DO NOT use a power drill for installation!
Install and test lock with door open to avoid being locked
out.
A Check door dimensions.
See consumer.schlage.com/Service-Support for door
preparation instructions if dimensions are different.
2³⁄₄ (70 mm)
OR
2³⁄₈ (60 mm)
2¹⁄₈ (53 mm)
Hole
1” (25 mm)
Door Edge
Model FE695, Lever Installation Instructions
Default Codes
Códigos de predeterminado
Codes du défaut
Place Label Here
Poner la etiqueta aquí
Placer l’autocollant ici
Scan for programming
information, help,
warranty, and more.
Alternate Faceplate
Placa frontal alternativa
Plaque frontale alternative
B Change faceplate, if necessary.
Choose the drawing that matches your door edge. If the hole
has no mortise, change to the circular faceplate.
Door Edge
No change necessary.
OR
Door Edge
Install Lock
1 Install latch.
Make sure latch angle faces door jamb.
OR
Actual Size
Jamb
Angle
Wood Block
(Not Included)
Angle

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Schlage Touch FE695 Lever and is the answer not in the manual?

Schlage Touch FE695 Lever Specifications

General IconGeneral
Lock TypeElectronic Lever
MaterialMetal
Power SourceBattery
Number of User Codes19
Keypad TypeTouchscreen
Door Thickness Compatibility1-3/8" to 1-3/4"
BacksetAdjustable 2-3/8" or 2-3/4"
HandingReversible
StyleModern
BrandSchlage
ModelFE695
FinishSatin Nickel
Battery Type9V
Security GradeGrade 2
Product TypeElectronic Lock
WarrantyLimited Lifetime Mechanical & Finish, 3-Year Electronics

Related product manuals