Need help?Do you have a question about the Schlage AL-SERIES and is the answer not in the manual?
General| Series | AL-SERIES |
|---|---|
| Handing | Non-handed |
| Backset | 2-3/4" |
| Latch | 1/2" throw |
| Door Thickness | 1-3/4" to 2-1/4" |
| Keyway | Schlage C Keyway |
| Material | Zinc |
| Certification | ANSI/BHMA Grade 1 |
| Cylinder | 6-pin |
| Construction | Heavy-duty |
Details the Jupiter lever design, material, and available finishes.
Details the Neptune lever design, material, and available finishes.
Details the Saturn lever design, material, and available finishes.
Describes the tactile warning feature on Saturn levers.
Lists and describes functions that do not require a key for operation.
Lists and describes functions that require a key for locking/unlocking.
Explains integration of full-size IC cores into AL Series locks.
Describes SFIC compatibility with various keyways and brands.
Details springlatch and deadlatch options for square corner doors.
Details springlatch and deadlatch options for round corner doors.
Details springlatch and deadlatch options for drive-in door preparations.
Describes a kit for adapting locks to rabbeted door and frame preparations.
To Next Page
