Need help?Do you have a question about the Schlage ALLEGION S-6000 and is the answer not in the manual?
General| Brand | Schlage |
|---|---|
| Model | ALLEGION S-6000 |
| Category | Door locks |
| Material | Metal |
| Access Methods | Keypad, Key |
| Power Source | Battery |
| Battery Life | Approximately 1 year |
| Door Thickness Compatibility | 1-3/8" to 1-3/4" |
| Keyway | Schlage 'C' keyway |
| ANSI Grade | Grade 1 |
| Backset | 2-3/8" or 2-3/4" |
Offers PIN code, smart card/fob, and key override entry options.
Allows entering random numbers before PIN to mask it from observers.
Facilitates quick and easy exits via a simple lever action.
Features a reliable mechanical mortice lock for enhanced security.
Automatically locks the door when closed, and re-locks if not opened after unlocking.
Prevents the door from being opened from outside when activated.
Triggers an alarm and suspends lock function if excessive force is detected.
Suspends lock function and sounds alarm after 5 incorrect entry attempts.
Notifies users via light and sound when batteries are low.
Do not disassemble; unauthorized alterations void the warranty.
Keep away from liquids; wipe moisture promptly and remove batteries if penetrated.
Check batteries for leaks every 6 months; replace if leakage occurs.
Do not clean with flammable materials like alcohol to prevent damage or fire.
Avoid heat sources and water submersion; do not use damaged batteries.
Prevent battery electrodes from contacting metal to avoid overheating or explosion.
Do not close the door with the deadbolt locked to prevent damage or malfunction.
Do not mix battery types/ages; ensure correct polarity to prevent leaks/explosions.
Main exterior part of the lock, including keypad and handle.
Interior part of the lock, housing battery compartment and internal mechanisms.
Covers the interior components of the lock.
The internal locking mechanism that engages with the strike plate.
Metal plate on the door frame that the deadbolt engages with.
Housing for the strike plate.
Mechanical key for manual override access.
Specifies 1.5V AA LR6 alkaline batteries.
Lamp that flickers when batteries need replacement.
Area for touching smart cards or fobs to operate the lock.
Keypad for entering PIN codes to operate the lock.
Lever used to open and close the door.
Terminals for connecting an external 9V battery for emergency power.
Slot for inserting the mechanical key for manual access.
Panel providing access to the battery compartment.
Button used for registration of PIN codes.
Shows locking status: locked, unlocked, or abnormal alarm status.
Button to manually lock the door in manual locking mode.
Screw used for mounting or securing parts of the lock.
Specifies 8 pieces of 1.5V AA LR6 alkaline batteries.
Button used for registration of card/fob.
Lamp flickers and alarm sounds when batteries need replacement.
Switch to activate or deactivate the privacy mode.
Lever for panic release, usable anytime.
Procedure to check battery status via the touch pad.
Steps for replacing the lock's batteries.
Information on battery life, usage, and important notes.
Using a 9V battery for access when main batteries are depleted.
Instructions for using the physical key to open the lock.
Allows entry of random numbers before the PIN to mask it.
Door locks automatically after closing.
Door locks by pressing a manual button after closing.
Steps to unlock the door using a PIN.
Steps to unlock the door using a registered card or fob.
Unlocking the door with muted audio feedback.
Door automatically locks when closed.
Door locks by pressing the manual lock button.
Easy escape via handle pull from the inside.
Door locks automatically when closed from the inside.
Door locks by pressing the manual lock button from the inside.
Prevents the lock from being opened from the outside.
Door locks automatically when closed.
Door re-locks automatically if not opened after unlocking.
Alarm sounds for multiple incorrect PIN/card attempts.
Alarm sounds if excessive force is applied to the door.
Steps to reset the unit to its original factory settings.
Adjusts the lock's sound output from mute to maximum.
Process for registering new PIN codes and managing existing ones.
Process for adding new cards or fobs.
Process for removing registered cards or fobs.
Steps to add a remote key to the lock system.
Instructions for deleting all registered remote keys.
To Next Page