Schleuniger EcoCut 3300 - Page 4

Table of contents
4|108
Reference Manual |Edition 4.0 (10-2013) | EcoCut 3300
3.4
INTERNAL TRANSPORTATION ..................................................18
3.5
STORAGE ...................................................................18
4
PRODUCT SPECIFICATIONS 19
4.1
DIMENSIONS / WEIGHT .......................................................19
4.2
TECHNICAL SPECIFICATIONS .................................................. 19
4.3
REQUIREMENTS ON THE INSTALLATION LOCATION ...............................20
4.4
RATING PLATE ...............................................................20
5
PRODUCT DESCRIPTION 23
5.1
CONCEPT ...................................................................23
5.2
FRONT ELEMENTS ............................................................23
5.2.1 Operator panel................................................................ 24
5.2.2 Gap setting wheel.............................................................. 24
5.2.3 Display of gap setup............................................................ 24
5.2.4 Setting knob for ejection chute..................................................... 24
5.2.5 Wire end switch................................................................ 24
5.2.6 Wire end switch lift............................................................. 24
5.2.7 Wire entry guide............................................................... 24
5.2.8 Roller lever................................................................... 24
5.3
REAR / CONNECTORS .........................................................24
5.3.1 Postfeed interface (PPI, option)..................................................... 25
5.3.2 RS 232 interface................................................................ 25
5.3.3 HS/PF (HotStamp/Prefeeder) interface................................................ 25
5.3.4 Pedal connector............................................................... 26
5.3.5 Rating plate................................................................... 26
5.3.6 Power connection.............................................................. 26
5.3.7 Main power switch.............................................................. 26
5.3.8 Fuse holder................................................................... 26
5.4
DANGEROUS ZONES ON THE MACHINE .........................................26
5.4.1 Safety marking................................................................ 27
5.4.2 Danger zones operating area...................................................... 27
5.4.3 Danger zones rear.............................................................. 28
6
INSTALLATION / FIRST COMMISSIONING 29
6.1
SAFETY INSTRUCTIONS .......................................................29
6.2
SAFETY APPLIANCES .........................................................29
6.3
POSITIONING / PUTTING INTO OPERATION ......................................29
6.3.1 Unpacking and setting up........................................................ 29
6.3.2 Setting the measuring unit and the menu language...................................... 30
6.3.3 Connecting compressed air (option)................................................. 30
7
GENERAL HANDLING / OPERATION 31
7.1
GENERAL TOPICS FOR THE OPERATION .........................................31
7.2
SWITCHING ON ..............................................................31
7.3
SWITCH OFF ................................................................ 31