EasyManuals Logo

SCHUBERTH S2 Manual

SCHUBERTH S2
Go to English
149 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #39 background imageLoading...
Page #39 background image
76 77
english
system on the top of the helmet shell
for ventilating the top of your head.
Air entering the helmet through this
inlet cowl is directed via channels
to the top of the head. Inside the
helmet, the head padding system
enables direct contact between
incoming air and the surface of the
head, thereby conducting the heat
away from the inside of the helmet
quickly. The ventilation is adjusted by
means of a slide on the air inlet cowl
that is easy to operate even when
wearing gloves. Moving the slide
backwards to the first locking position
produces partial ventilation, moving it
further back opens the air inlet to its
full extent.
Summer and winter adjustment
The ventilation of the S2 can also
be adjusted to suit the seasons,
weather conditions or your personal
preferences. While you will prefer the
cooling air current to flow directly on
to your head in summer,
in autumn/winter you can reduce
the volume of incoming cold air, or
divert it, by covering the ventilation
channels with the head pad. To do so,
raise the middle bar of the head pad
slightly and fold out the fabric flaps
located behind the front section.
13. VENTILATION SYSTEMS
Ventilation device 1 – face shield setting
The S2 has a face shield that adjusts to several positions. Depen-
ding on your road speed and the tendency of the face shield to
mist up, open the face shield sufciently wide to stop it misting
up but so that it still protects your eyes from excessive draft.
Urban position
In its second locking position, the face shield is automatically in
urban position. Air entering through the bottom gap flows over
the inside of the face shield and escapes through the opening at
the top.
Ventilation device 2 – inlet vent in chin area
(face shield ventilation)
To ventilate the face shield, the S2
is provided with an inlet in the chin
area. Irrespective of riding posture,
around 80-90% of the central
airstream flows directly into this
inlet when open. A deector ensures
that the air current ventilates the face
shield effectively even at low road
speeds. You can open and close the
inlet by pushing the vent upwards or
downwards.
Ventilation system 3 – head ventilation
There is a large air inlet cowl with a
three-stage adjustable ventilation
C. THE HELMET
english

Table of Contents

Other manuals for SCHUBERTH S2

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the SCHUBERTH S2 and is the answer not in the manual?

SCHUBERTH S2 Specifications

General IconGeneral
Helmet TypeFull-Face
Safety StandardECE 22.05
Shell MaterialFiberglass
VentilationAdjustable
VisorAnti-fog, scratch-resistant
InteriorRemovable, washable
Sun visorIntegrated
WeightApprox. 1, 450 grams
Communication SystemPrepared for SCHUBERTH Rider Communication System SRC-System S2

Related product manuals