30
3. Push the retaining strap with a
gentle pressure towards the shell
into the guide gap between the
inner and outer shells.
4. Repeat steps 1-3 with the other
cheek comfort pad.
Ear-Pads
The ear pads supplied as standard can be
positioned individually in the ear area
of the helmet by means of a Velcro-type
fitting. For stronger padding around the
ears, pads with other thicknesses are
available as accessories.
Note:
For an overview of all accessory and parts please visit
www.schuberth.com and check the ‘Accessories’ section
of your helmet model.
Note:
When fitting the inner lining, ensure that the ventilation
gaps of the head band are positioned over the ventilation
D. the helmet
To Next Page
Loading...
