SCHUBERTH SR1 - 2. Face Shield

44
1. OUTER SHELL
To clean the helmet shell, you can use water, soapy water or one
of the commonly available motorcycle shampoos, cleaners,
polishes and plastic cleaners, or cleaning fluid. The use of water
and soapy water is usually sufficient. Make sure when using the
other cleaning materials that these do not come into contact with
the visor, since these can cause damage to the visor and coating.
Warning:
Never use motor fuel, thinners, glass cleaner or other solvents
to clean the helmet! Your helmet can be seriously damaged
by these substances without visible damage.
Warning:
A helmet damaged or weakened by a cleaning agent may not
provide head protection in an accident resulting in serious
personal injury or death!
Warning:
Never use hot or salt water to clean the helmet. Your helmet
can be seriously damaged by this treatment without damage.
2. FACE SHIELD
PINLOCK
®
VISOR
Outer surface of the Face Shield
Use a soft cloth and a mild soap solution (< 70 °F) to remove dirt
from the outside of the Face Shield. To dry the Face Shield, use a
lint-free cloth and apply gentle pressure.
h. CAre AnD mAintenAnCe