39
english
Warning:
Always check your helmet before every ride!
1. Check the Face Shield and sun visor.
2. Check the correct function of the shield and visor mechanics.
3. Check for cracks in the helmet. Strong acid (e.g. battery
acid) can damage the shield bases. If you find cracks or
damage, stop using the helmet immediately.
4. Check helmet for deterioration. If you find deterioration
in any part of a component, either replace that component
or get a new helmet. If these parts come loose and/or fall
off while you are riding, your vision may be blocked, which
could cause an accident resulting in serious personal injury
or death.
5. Check the security of the retention system (see section G.3.).
For checking instructions and procedure see also section F.
(before every ride) of this manual.
Warning:
Don’t mistreat your helmet!
Never ride with the helmet hanging from the helmet holder,
and do not hang the helmet from angled supports such as
a mirror. Do not sit on or throw your helmet. You should
not expose the liner of your helmet to strong sunlight and
excessive heat such as near heaters or where temperatures
exceed 50 °C (122 °F). Avoid spraying insect repellent chemicals
(such as 'naphthalene') near the helmet. Mistreating your
helmet will damage the shell and impact absorbing liner,
reducing the helmet’s ability to protect you in an accident.
Warning:
Don’t use the helmet for anything than motorcycling!
No helmet provides absolute protection from all conceivable
impacts. This helmet has been specially developed for
motorcycle riding. It may not be suitable for other purposes.
To Next Page
Loading...
Need help?
General
