BUTTON NAMES & FUNCTIONS
KEY
FUNCTION
Turn the power On/ Off
Used to reset the load to Zero.
Used to reset the accumulated values, and also to print the final
accumulated weight to a printer if a printer is attached.
When this button is pressed, the weight is accumulated to the total and
saved until the CLEAR button is pressed. Please note in order to save all
weights the ADD button must be pressed for every weighing.
Used to display the current accumulated total in the indicator.
Once the correct Weigh cycle is completed this button is used to display the
weight upon the screen. The weight will stay visible for approximately 5-6
seconds.
To Next Page
Loading...