SCHUNK MPG-plus 12 - Page 20

Assembly
20
13.00 | MPG-plus | Assembly and operating manual | en | 389216
5.2 Connections
5.2.1 Mechanical connection
Evenness of the
mounting surface
The values apply to the whole mounting surface to which the
product is mounted.
Requirements for evenness of the mounting surface (Dimensions in mm)
Edge length Permissible unevenness
< 100 < 0.02
> 100 < 0.05
Connections at the
housing
The product can be mounted from three sides.
When selecting the fastening screws, observe the values
prescribed by SCHUNK, see following table.