SCHUNK PWG-S 40 - Sizes; Warranty; Scope of Delivery; Sealing Kit

General
6
03.00 | PWG-S | Assembly and operating manual | en | 389361
1.1.3 Sizes
This operating manual applies to the following sizes:
• PWG-S 40
• PWG-S 60
• PWG-S 80
1.2 Warranty
If the product is used as intended, the warranty is valid for 24 months
from the ex-works delivery date under the following conditions:
• Observe the specified maintenance and lubrication intervals
• Observe the ambient conditions and operating conditions
Parts touching the workpiece and wear parts are not included in the warranty.
1.3 Scope of delivery
The scope of delivery includes
• 2-finger angular gripper PWG-S in the version ordered
• Assembly and Operating Manual
• Accessory pack
1.3.1 Sealing kit
Content of the accessory pack:
• 2 x O-ring for hose-free direct connection
• 1x cylindrical pin
• PWG-S 80: 2 x locking screw for hose connections
ID.-No. of the accessory pack
Accessory pack for ID number
PWG-S 40 5509449
PWG-S 60 5509450
PWG-S 80 5509451
1.4 Accessories
A wide range of accessories are available for this product
For information regarding which accessory articles can be used
with the corresponding product variants, see catalog data sheet.
1.4.1 Sealing kit
Content of the sealing kit:
• 1 x sealing wiper ring
• PWG-S 40: 1 x sealing wiper ring (PUR)
• PWG-S 40: 3 x O-rings for hose-freedirect connection:
PWG-S 60-80: 4 x O-rings for hose-free direct connection
• PWG-S 40/80: 2 x quad ring
PWG-S 60: 1x quad ring
• PWG-S 80: 1 x sealing ring
ID.-No. of the seal kit
Seal kit for ID number
PWG-S 40 0370550
PWG-S 60 0370551
PWG-S 80 0370552