Schwinn 125 - Specifications; Before Assembly

5
SpECIfICATIONS
Before Assembly
Select the area where you are going to set up and operate your machine. For safe operation, the location must be on a hard,
levelsurface.Allowaworkoutareaofaminimum90”x69”(229cmx175cm).
Basic Assembly Tips
Follow these basic points when you assemble your machine:
•Readandunderstandthe“ImportantSafetyInstructions”beforeassembly.
•Collectallthepiecesnecessaryforeachassemblystep.
•Usingtherecommendedwrenches,turntheboltsandnutstotheright(clockwise)totighten,andtheleft(counterclock-
wise) to loosen, unless instructed otherwise.
•Whenattaching2pieces,lightlyliftandlookthroughtheboltholestohelpinserttheboltthroughtheholes.
•Theassemblyrequires2people.
Maximum User Weight: 300 lbs. (136 kg)
Power Requirements:
 OperationalVoltage:OperationalVoltage9VDC
Operating Current: 1500 mA
Regulatory Approvals:
AC Power Adapter: UL listed, CSA certified (or
equivalent),Rated120V60Hz
Input,9VDC,1500mAOutput.
Class 2 or LPS.
!
This product, its packaging, and components contain chemicals known to the State of California to cause cancer, birth
defects, or reproductive harm. This Notice is provided in accordance with California’s Proposition 65. If you would like
additional information, please refer to our website at www.nautilus.com/prop65.
52”
(132 cm)
42” (106 cm)
21”
(53 cm)