COMPUTER (#1) to HANDLEBAR ASSEMBLY (#2) with COMPUTER MOUNTING
SCREWS (#3). (In computer back) Tighten with Phillips head screwdriver.
Step 16: Plug AC ADAPTOR (#71) into the wall and into the recumbent bike. The
POWER PLUG (#72) on the bike is located at the front end of the MAIN UNIT (#13)
just above the FRONT STABILIZER TUBE (#11)
Seat Adjustment
For best results, the seat should be adjusted for your height.
1. Unlock “seat locking” mechanism.
2. Adjust seat location so that with feet on the pedals, you can comfortably reach
pedal at full extension.
That’s it!
You’re finished and now you can begin to reach your fitness goals!
Please reference the Owner’s Manual for information regarding computer
operation, product maintenance, warranty information, and general fitness and
exercise guidelines.
Schwinn Customer Service
1.800.864.1270
To Next Page
Loading...
