Schwinn Airdyne AD6 International model User Manual

8
1. Attach Stabilizers to Frame
Note: Hardware is pre-installed and not on the Hardware Card ( *).
ASSEMBLY
2. Attach Pedals and then Pedal Straps to Frame Assembly
Note: The Left Pedal is reverse-threaded. Be sure to attach Pedals on the proper side of the Bike. Orientation is based from
aseatedpositiononthebike.TheLeftPedalhasan“L”,theRightPedalan“R”.
14
10
R
15
9
X2
14
10
R
15
9
X2
8
1
12
*
6mm
*
X4

Schwinn Airdyne AD6 International model Specifications

General

Brand	Schwinn
Model	Airdyne AD6 International model
Category	Elliptical Trainer
Language	English