12
D
B
5. Saturate the Brake Pad felt (D) with silicone lubricant. Wipe off the
excess lubricant to prevent drips and stains.
6. Reinstall the Brake Pad (B).
NOTICE: Do not crimp the cable.
7. Reinstall the Fender.
NOTICE: Do not crimp the cable.
8. Adjust the Resistance Knob (A) as necessary.
9. Final Inspection
Inspect your machine to ensure that all hardware is tight and components
are properly assembled.
Do not use until the machine has been fully
assembled and inspected for correct
performance in accordance with the Owner’s
Manual.
To Next Page
Loading...
