9
REPLACEMENT PROCEDURE SKILL LEVEL
Level I : Low - very little mechanical knowledge or exposure.
Level II : Intermediate - some experience with mechanical procedures
Level III : Advanced - knowledgeable about mechanical procedures
!
Disconnect all power to the machine before you service it.
:KHQGLVSRVLQJRIROGSDUWVREH\WKHDSSOLFDEOHORFDODQGSURYLQFLDOUHTXLUHPHQWV
For instructions to replace the following parts, please refer to the Assembly Manual for your bike:
• Seat
• Seat Post
• Front Stabilizer
• Rear Stabilizer
• Water Bottle Holder