Page 25
637-8808 Rev. J
X+Z Bike Pedal Removal
Required Tools:
• 8mm Allen Key
• Crank Puller Tool with 22mm X 1mm Threading (CWP-7)
1. Use an 8mm allen key to remove the pedal
bolt securing the pedal to the crank arm.
Fig. 48
2. Use a crank puller tool to remove the pedal.
3. Repeat Steps 1+2 for the other pedal
4. To install new pedals, refer to the
documentation included with the pedals.
Fig. 49
To Next Page
Loading...
