GB–14
BASIC SETUP
2. Setup Items Introduction
SYSTEM SETUP
• TV SYSTEM
According to the Color System of the TV, you can choose the TV System.
– NTSC : Choose this settings if your DVD player is connected to a NTSC TV.
–PAL : Choose this settings if your DVD player is connected to a PAL TV.
–PAL-M : Choose this settings if your DVD player is connected to a PAL M TV.
–AUTO : Choose this settings if your DVD player is connected to a multi-system TV.
SYSTEM SETUP
SCREEN SAVER
VIDEO
TV TYPE
PASSWORD
RATING
DEFAULT
EXIT SETUP
TV SYSTEM NTSC
PAL
PAL M
AUTO
• SCREEN SAVER
If the screen saver is on, when your DVD player is in Stop, Open, or No Disc state, or there is a
frame frozen for more than 3 minutes, the screen saver will be displayed. This feature can
protect the screen from damage.
–ON : Choose this setting to activate the screen saver.
–OFF : Choose this setting to cancel the screen saver
SYSTEM SETUP
VIDEO
TV TYPE
PASSWORD
RATING
DEFAULT
EXIT SETUP
ON
OFF
SCREEN SAVER
TV SYSTEM
• VIDEO
–INTERLACE-YUV : Choose this setting if your DVD player is connected to a TV with Y, Cb, Cr
video cables.
–TV-RGB : Choose this setting if your DVD player is connected to a TV with an SCART cable.
–P-SCAN : Choose this setting if your DVD player is connected to a progressive scan TV with Y,
Pb, Pr video cables.