SCOTT MTB User Manual

ENGLISHENGLISH
157 |
| 156
MOUNTAIN BIKE AND MOUNTAIN BIKE-PEDELEC | ORIGINAL OPERATING INSTRUCTIONS 2017ORIGINAL OPERATING INSTRUCTIONS 2017 | MOUNTAIN BIKE AND MOUNTAIN BIKE-PEDELEC
Component What to do Before every Monthly Annually Other
ride intervals
Painted/anodized/ Polish · every
carbon surfaces 6 months
at least
Wheels/spokes Check for trueness and tension ·
True or retighten o if necessary
Handlebars and Check and replace, if necessary o every
stem (aluminium 2 years at
and carbon) the latest
Headset Check for bearing play ·
Regrease o
Metal surfaces Polish (except: rim sides of · every
rim brakes, rotors) 6 months
at least
Hubs Check for bearing play ·
Regrease o
Pedals (all) Check for bearing play ·
Pedals (clipless) Clean and grease locking ·
mechanism
Seat post/stem Check bolts ·
Dismount and re-lubricate, o
carbon: new assembly
paste (no grease!)
Front/rear derailleur Clean and grease ·
Quick-releases/ Check seat ·
thru axles
Bolts and nuts Check and retighten, ·
(Multi-speed hubs, if necessary
mudguards etc.)
Valves Check seat ·
Cables gears/brakes Disassemble and regrease o
If you have a certain degree of mechanical skills, experience and suitable tools,
such as a torque wrench, you should be able to do the checks marked · by your-
self. If you come across any defects, take appropriate measures without delay. If
you are in doubt or if you have any questions, contact your SCOTT dealer.
Jobs marked o are best left to your SCOTT dealer.
NOTE!
I
For your own safety, bring your SCOTT bike to your SCOTT dealer for its
first inspection after 100 to 300 kilometres, 5 to 15 hours of initial use or
four to six weeks, and at the very latest after three months.
SCOTT SERVICE AND MAINTENANCE SCHEDULE
It is advisable to have your SCOTT bike serviced regularly after the bedding-in
phase. The schedule given in the table below is a rough guide for cyclists who
ride their bike between 1,000 and 2,000 km or 50 to 100 hours of use a year.
If you consistently ride more or if you ride a great deal on poor road surfaces,
the maintenance periods of the SCOTT service plan will shorten accordingly.
Component What to do Before every Monthly Annually Other
ride intervals
Lighting Check ·
Tyres Check pressure ·
Check tread and side walls ·
Brakes (rim brakes) Check lever travel, wear of brake ·
pads, position of pads relative
to rim; test brakes in stationary
Brakes Check lever travel, wear of brake ·
(hydraulic rim) pads, position of pads relative
to rim; test brakes in stationary
Brakes (drum/roller) Lever travel, test brakes ·
in stationary
Brakes, brake pads Clean ·
(rim brakes)
Brake cables/pads/ Visual inspection ·
lines
Brakes (disc brakes) Lever travel, brake pads, seals, ·
test brakes in stationary
Replace liquid (DOT-liquids) o
Suspension forks Check and retighten bolts, o
if necessary
All-inclusive service (change oil) o
Rims (of rim brakes) Check thickness, o after
replace if necessary 2nd set of
brake pads
at the latest
Fork (rigid) Check and replace, if necessary o at least
every
two years
Bottom bracket Check for bearing play ·
Dismount and regrease (cups) o
Chain Check and grease, if necessary ·
Check wear, replace, if necessary, o after
derailleur gears 1,000 km
or 50 hours
of use
Telescopic Service ·
seat post
Crank Check and retighten, if necessary ·

SCOTT MTB Specifications

General

Brand	SCOTT
Model	MTB
Category	Bicycle
Language	English