ENGLISH
| 172
ORIGINAL OPERATING INSTRUCTIONS 2017 | MOUNTAIN BIKE AND MOUNTAIN BIKE-PEDELEC
HANDOVER REPORT
The above-described SCOTT bike was delivered to the customer ready for use,
i.e. after its final assembly, inspection and functional check as described below
(additionally required routines in parentheses).
£ Lighting
£ Brakes front and rear
£ Front suspension
(adjusted to suit customer)
£ Rear suspension
(adjusted to suit customer)
£ Wheel set (trueness/spoke ten-
sion/tyre pressure)
£ Handlebars/stem (position/bolts
checked with torque wrench)
£ Pedals (adjustment of release force
if necessary)
£ Saddle/seat post (height and
position of saddle adjusted to
suit customer, bolts checked with
torque wrench)
£ Gears (limit stops: adjustment,
function)
£ Bolted connections of attach-
ment parts (checked with torque
wrench)
£ Test ride
£ Other routines performed
SCOTT dealer
last name
Street
City
Phone
Fax
E-Mail
Handover date, stamp,
signature of the SCOTT dealer
The customer confirms with his signature that he received the SCOTT bike in
proper condition along with the accompanying documents specified below and
that he was instructed on the proper use of the SCOTT bike.
Additional manuals on this SCOTT info CD
Brake system, Vario seat post, pedal system, front/rear suspension, seat post,
stem, gear system, supplementary operating instructions motor “E-bike/
pedelec”
Customer
Last name, first name
Street
ZIP code/city
Phone, fax
E-Mail
Location, date, signature
All rights reserved ©2017 SCOTT Sports SA
Distribution: SSG (Europe) Distribution Center SA
P.E.D Zone C1, Rue Du Kiell 60 | 6790 Aubange | Belgium
WWW.SCOTT-SPORTS.COM
SCOTT Sports SA
Route du Crochet 17, CH–1762 Givisiez
Phone: +41 26 460 16 16 | Fax: +41 26 460 16 00
Email: scottsupport@scott-sports.com
V6.1/24012017
To Previous Page
Loading...
Need help?
General
