SCRAM Systems SCRAM GPS - Supervision Plan; Offender Zones

SCRAM GPS
Quick Reference Guide
4
4
4
4
4
4
4
SUPERVISION PLAN
The SCRAM GPS Bracelet being assigned to the offender
is selected while establishing the supervision plan that will
be used. To perform these steps:
1. Click the Supervision Plan tab.
2. Select the bracelet being assigned in the Locator
drop-down list.
3. Click the Add button in the Assign Locator section.
4. Select the supervision plan being used for this
offender in the Supervision Plan drop-down list.
5. Click the Apply button.
OFFENDER ZONES
To create an offender zone:
1. Select the Zones tab.
2. Click the Create Zone button.
3. Select the type of zone being created.
4. Enter the zone name in the Name fi eld.
5. Select the zone shape (circle, polygon, or rectangle)
in the Shape drop-down list.
6. Select an option in the Location Type drop-down list.
The ‘Home’ and ‘Work/School’ options are only
available for Onboard Inclusion zones. The ‘Other’
option can be used for any type of zone.
7. Enter/select address information.
8. Select the Enters and/or Exits check boxes if you
want to view when the offender enters or exits this
zone.
9. Click the Apply Changes button.
The map moves to the address entered.
10. Click the Save button.