Screen TP-JL350UV+ - Operation Flow; Procedures for Upgrading from Ver.2.40(JD001) and Startup

Rev.2
3
§1 Operation Flow
§1.1 Procedures for upgrading from Ver.2.40(JD001) and startup
1. Create Backup *skip when Acronis is not available.
cf. Truepress Jet L350UV Disk maintenance guide
↓
※When upgrading EQUIOS Server to Ver.2.40JEQ003
(2). Upgrade EQUIOS Server
cf. “
§2.1 Installation of the Patch for EQUIOS Server
”(P6)
↓
※When upgrading EQUIOS Server to Ver.2.40JEQ003
(3). Upgrade EQUIOS Client
cf. “
§2.2 Updating of EQUIOS Client
”(P10)
↓
※When upgrading EQUIOS printer controller to Ver.2.40JD003
(4). Upgrade EQUIOS printer controller
cf. “
§3.1 Printer Controller Ver.2.40JD003 Upgrade Procedure
”(P14)
↓
5. Upgrade EQUIOS printer controller
cf.
§3.2 Printer Controller Ver.2.40JD005 Upgrade Procedure
”(P18)
↓
6. Firmware version upgrade for each board.
cf. “
§8 Firmware version upgrade and parameter setting for each board.
”(P45)
↓
7. Version upgrade of the file for the printer
cf. “
§9 Version upgrade of the file for the printer.
”(P59)
↓
When installing high speed option
(8). Installing 60m/min option
cf. “
§4.1 60mpm option Install Procedure
”（P22）
↓
9. IP address Setting
cf. “
§5 IP address setting
”(P36)