Screen TP-JL350UV+ - Upgrade of the Maintenance Files for the Printer; Copying of Sequence Files and Group Button Files (CCD, GBT Files)

Rev.2
60
3. Click the upper-right section (red circle) in the startup window to exit the Printer
Controller.
§9.2 Upgrade of the maintenance files for the Printer
Unzip the ToolsForPrinter_V1+Rev.02.zip, and copy the file to the D drive of the PC.
§9.3 Copying of Sequence files and Group button files (CCD, GBT files)
1. Open BoardSDcardAccessForMCPU.exe.
If the device selection dialog box is displayed, select “SPI_MCPU(P1)” and then click “OK”.
2. Click “select” to display the file selection dialog box.
①
⑥
⑤
②