Rev.2
64
§9.4 Copying of the Head maintenance files for the KJCPU board
Copy the Head maintenance files to the KJCPU boards.
Exit Controller, and then open
BoardSDcardAccessForHCPU.exe
In
D:\ToolsForPrinter\BoardSDcardAccessForHCPU
folder.
1.
Open BoardSDcardAccessForHCPU.exe
If the device selection dialog box is displayed, select “SPI_MCPU(P1)” and then click “OK”.
2.
Select "HCPU1" for the KJCPU 1 board.
3.
Click “select” to display the file selection dialog box.
4.
Select the folder and click “OK”.
→D:\ToolsForPrinter
5.
Click “select all”.
⑤
To Next Page
Loading...