Screen TP-JL350UV+ - Parameter Setting

Rev.2
51
17. Attach the exterior cover (Under) of the Back side.
18. Turn off the printer.
19. Return the Dip SW of the KJCPU board to its original position.
Turn No.8 of SW5 ( 8 pole Dip SW ) on the KJCPU board from ON to OFF.
20. Attach the exterior cover of the head electrical equipment.
(1)
(2)
(3)
(4)
← Frequency display
Parameter Setting
A：Mode Select
B：Setting
C：Escape
D：Jog Dial