Rev.2
45
§8 Firmware version upgrade and parameter setting for each board.
Download the firmware files and parameter setting for each board using the Printer Controller
“Firmware”.
The data for downloaded will be saved to
D:\TP-JL350\Client\Firmware\V240TP005
§8.1 Firmware download and parameter setting.
1. Turn off the printer, and remove the exterior cover of the head electrical equipment.
2. Dip SW change of KJCPU board.
Turn No.8 of SW5 ( 8 pole Dip SW ) on the KJCPU board from OFF to ON.
※It is necessary to change Dip SW of all three boards.
If you forget even one, the software update will not succeed.
To Next Page
Loading...