Screen TP-JL350UV+ - Supporting A4 Size Scanners; Procedures

To Next Page

To Previous Page

Rev.2

§6 Supporting A4 size scanners

As a default, the parameters are set for an A3 scanner. Before using an A4

scanner, change the parameters using the following procedure.

§6.1 Procedures

1. Rename the ManualShadingGUI.ini file in the D:\TP-JL350\Client\Preferences folder as

ManualShardingGUI_A3.ini.

2. Rename the ManualShadingGUI_A4.ini file in the same folder as ManualShadingGUI.ini.

3. Rename the ShadingTool.ini file in the D:\TP-JL350\Tools folder as ShadingTool_A3.ini.

4. Rename the ShadingTool_A4.ini file in the same folder as ShadingTool.ini.

Exit PrintNav.exe, and then open it again.