Rev.2
36
§5 IP address setting
1. Select Start->Service Manager and stop EQUIOS service.
2. Select Start->Maintenance Tool.
3. Double-click “IP Address Change Tool”.
4. The original IP address is displayed in the left pane of the dialog box.
The list box in the right pane shows the IP address for the server on which the IP Address
Change Toll is running.
Select an IP address to be used for the connection from an EQUIOS client.
As the “Execute” button becomes active when the IP address in the right pane is different
from that in the left pane, click the “Execute” button.
5. After the IP address has been changed, click the “Close” button in the bottom right of the
dialog box to complete the change operation.
To Next Page
Loading...