Need help?Do you have a question about the Scytek electronic G777 and is the answer not in the manual?
Describes the functions of buttons on the transmitter's Page 1.
Describes the functions of buttons on the transmitter's Page 2.
How to check the current status of the vehicle security system.
Step-by-step guide to arming the security system remotely.
Step-by-step guide to disarming the security system remotely.
How to instantly trigger the alarm in an emergency.
Procedure to disarm the system if the transmitter is lost or inoperable.
Details on the three programmable Anti-Carjacking modes.
Recommended interior mounting locations for the main control unit.
Recommended locations and orientation for mounting the siren.
Guidance on selecting a suitable interior mounting location for the shock sensor.
Detailed pin-out and connection descriptions for the 14-pin main harness.
Description of various plug-in connector ports for system modules.
Steps to enter programming mode and perform a factory default reset.
Introduction to the main programmable system options (1-5).
Wiring diagram for negative trigger door lock systems.
Wiring diagram for positive trigger door lock systems.
Wiring diagram for reverse polarity door lock systems.
Wiring diagram for vacuum-operated door lock systems.
Wiring diagram for adding aftermarket door lock actuators.
Diagram showing connections to the main SCYTEK SECURITY MODULE.
General| Type | Car Alarm |
|---|---|
| Model | G777 |
| Remote Start | Yes |
| Keyless Entry | Yes |
| Panic Mode | Yes |
| LED Indicator | Yes |
| Anti-Theft | Yes |
| Engine Immobilizer | Yes |
| Valet Mode | Yes |
| Operating Voltage | 12V DC |
| Shock Sensor | Yes |
| Alarm Features | Siren, Starter Kill |
| Remote Control | 2 Remotes Included |
To Next Page