SD CodeFree™ BLOOD GLUCOSE MONITORING SYSTEM
25
Understanding Your New System
• If you select the post-meal alarm
‘2h’ feature and subsequently, at
any time, test your blood glucose
level using the pre-meal mark, the
‘clock symbol’ will appear on the
result display and the monitor will
‘beep’ 2 hours later continuously
for 1 minute to remind you to test
your blood glucose level.
• If you perform the pre-meal test
while the post-meal alarm setting
is on, then the post-meal mark
will appear automatically on the
display when you test within the
following period: from 30 to 130
minutes after your pre-meal test.
• If you mark the new test result
with a pre-meal mark, the old
alarm setting will be ignored and
only the new setting will sound in
2 hours.
NOTE
To Next Page
Loading...
