SD CodeFree™ BLOOD GLUCOSE MONITORING SYSTEM
33
Control Solution Test
1. Performing a Control Solution Test
You need the meter, a test strip, and control
solution Level M or Level H. The control level is
printed on the test strip label.
For more information on how to obtain SD
Control Solution, contact your distributor or call
+82-31-300-0400
STEP-1:
1) Remove a new test strip from its storage
container. Be sure to tightly replace
container cap after removing the test strip.
2) Insert a test strip (with gold coloured bars
facing upwards and arrow pointing towards
the meter) into the test strip slot. The meter
turns on automatically.
A set of Level M and H control solutions
is available for purchase. To order
control solutions, talk to your medical
professional or the distributor. Your
meter is designed to recognize the
dierence between the SD Control
solution and blood. The meter
automatically stores the test results
using a control solution, letting you
review them. The meter does not
include them in averages.
NOTE
To Next Page
Loading...
