SD CofeFree - Using SD Codefree Test Strips

SD CodeFree™ BLOOD GLUCOSE MONITORING SYSTEM
29
Understanding Your New System
11. Using SD CodeFree™ Test Strips
[ Important Test Strip Information ]
• Only use SD CodeFree™ test strips. Using other
test strips with this meter can cause inaccurate
results or even damage the meter.
• After removing a test strip from the container,
replace the container cap immediately and
close it tightly.
• Use the test strip within three minutes after
you take it out of the container.
• Store test strip containers in a cool, dry place
at 2-32°C (36-90°F). Keep away from direct
sunlight and heat. Do Not refrigerate test
strips.
• Do not expose test strips to heat, moisture or
humidity. Temperatures outside the required
range, as well as moisture and humidity (e.g.
bathroom, kitchen, laundry room, car, or
garage) can damage your test strips and lead
to inaccurate results.
• Onlystoreteststripsintheiroriginalcontainer
to avoid damage or contamination. Do not
transfer test strips to any other storage device
and do not store the test strips outside of their
original container.
• Donotuseteststripsfromanycontainerthat
is damaged or has been left open to the air.
• Writetheopeningdateonthecontainerlabel
when you rst open it. Discard remaining SD
CodeFree™ Test Strips after the discard date.
(3 months after rst opening the container).