HotFind-D Infrared Camera Operation Manual
31
The folder will be named from “SAT00000” to “SAT09999”, number
by number. The current folder name is displayed in the menu. For
example, if the current name is “SAT00081”, then the name of the
image you save is “SAT00082”.
After pressing the key “S” for 2-3 seconds, the image is saved.
（2） Open Images
Confirm that images have been saved in the Flash Disk. Select
“Open” under File menu, and press menu(enter) key. The words
“Opening an image” is displayed on the screen along with the image
name and the number of images saved in the PC Card as the following
figure.
Press the Direction key“
△,
+
” or “ ” to select an image and press
menu(enter) key, and the image is opened. Press the Direction key “ ”
or “ ”, the saved images will be opened in turn.
（3） Delete Images
Select “Delete” under “File” menu, and press menu(enter) key. The
operations after this are the same as those of “Open”, and then the
current image is deleted.
（4） Psudocolor shift
Select “Setup-Image” under Setup menu, and press menu(enter)
key.
To Next Page
Loading...