Sea-doo GTX 4-TEC User Manual

6) Shift Lever
A push-pull lever:
–forward
– neutral
– reverse.

WARNING
Shift lever should only be used
when the engine is idling and wa-
tercraft is completely stopped. Do
not use as a grab handle.

WARNING
Only use reverse at slow speed
and for the shortest time possible.
Always ensure the path behind
is clear of objects and pe rsons in -
cludin g children playing in shallow
water.
CAUTION: Never rev the engine at
high RPM in rever se.
From the forward position, pull the
lever to reverse. Push back to go to
forward. Always set in forward when
finished. To find the neutral, set in re-
verse then push b ack until the water-
craft stops moving backwards.
1
F18J01Y
TYPICAL
1. Forward position
F18J02Y
1
TYPICAL
1. Neutral position
F18J03Y
1
TYPICAL
1. Reverse position
_____________________
39

Sea-doo GTX 4-TEC Specifications

General

Manufacturer	Sea-Doo
Model	GTX 4-TEC
Category	Personal Watercraft
Displacement	1494 cc
Horsepower	155 hp
Fuel Type	Gasoline
Seating Capacity	3
Hull Material	Fiberglass
Engine Type	4-stroke
Fuel Capacity	15.9 gallons
Width	48 in