WARNING
If throttle lever does not auto-
matically return, do not operate
watercraft and see your authorized
Sea-Doo dealer.
F01K01Z
1
2
1. Should move freely
2. Slight free-play must be present here
Engine Oil Change and Oil
Filter Replacement
The oil change and filter replacement
should be performed by an authorized
Sea-Doo dealer.
Valve Adjustment
There is no valve adjustment to be per-
formed on this engine.
Coolant Replacement
The coolant replacement should be
performed by an authorized Sea-Doo
dealer.
Fuel Injection System
The fuel injection s ystem inspectio n
should be performed by an authorized
Sea-Doo dealer. Fuel system pres-
surization should be conducted at the
same time.
Steering Alignment
When the handlebar is directed in
straight ahead position, the jet pump
nozzleshouldbeinthesamedirec-
tion allowing the watercraft to run in
a s traight line. The rear edge of side
vanes should be pointing out side by
approximately 20° when the handle-
bar is p ointing straight ahead.
F18L0ZZ
1
1
1. Approximately 20° when handlebar is
pointing straight ahead
Refer to an authorized Sea-Doo dealer
if an adjus tment is nec essary.
WARNING
Ensure the handlebar and jet
pump nozzle operate freely from
side to side and are not stress-
ing th e steerin g cable or brackets.
Never turn handlebar while some-
one is nearby rear of watercraft.
Keep away from steering moving
parts (nozzle, side vanes, linkage
etc.).
VTS Adjustment
(if so equipped)
Push on arrow pointing upward on VTS
button u ntil the VTS stops. The nozzle
should be up without interfering with
the venturi.
96
______________________