6
SWITCHING ON THE DRIVER
If the Driver display is o, press the “M” button for at least five seconds to
turn it on.
SWITCHING OFF THE DRIVER
If the Driver will not be used for an extended period, you can turn the instrument
o to save energy in the battery.
• WARNING!
Switching o the Driver resets the system, which permanently deletes
all records in the logbook. Therefore, if you don't want to lose your saved
dive data, you must first download them to PC or Mac using the dedicated
software, which you can download for free from www.seacsub.com, and
the USB connecting cable, available separately.
General settings (time, date, unit of measure, alarms, etc.) are saved.
How to switch o: from the DIVE menu, press the “D” button until the display
switches o.
To Next Page
Loading...
