Website: www.seada.co.uk 7/23 E-mail: sales@seada.co.uk
The header of the main window has four titles including File, System, Connection and Help.
◆ Click “File” → “Save” to save the current setting.
◆ Click “File” → “Save as” to save all configuration information as a file.
◆ Click “File” → “Open” to open a configuration file.
◆ Click “System” → “Version” to query the current software version.
◆ Click “System” → “Message” to query the Link Status, Machine Type, Software
Version, IP Information, MAC address.
◆ Click “File” → “Software Update”
Hold the button “3” and power on system until the button lights up to enable update
mode → Open upgrade Web page (http://192.168.0.178:4001/) on IE → Type
User ID (admin) and Password (123456) → upload update file → Click “Upload”
◆ Click “System” → “Factory Defaults” to restore factory defaults.
◆ Click “Connection” → “TCP/IP” → “Reconnect” to reconnect all SDCP6.
◆ Click “Connection” → “Upload” → to load the MCU information from the selected
SDCP6 to control software.
◆ Click “Connection” → “Download” → to download the current setting information to
the selected SDCP6 from the control software.
To Next Page
Loading...