SeaDoo GTX 4-TEC User Manual

38
NOTE: Spare spark plugs are not sup-
plied with the watercraft.
20) Front and Rear
(bow/stern) Eyelets
Front (bow) Eyelet
Eyelets can be used for mooring, tow-
ing and as a tie-down point during traile-
ring.
1. Front (bow) eyelet
Rear (stern) Eyelet
This eyelet allows a rope with a hook,
a closed end or an open end to be at-
tached.
1. Rear (stern) eyelet
21) Mooring Cleats
These cleats can be temporarily used for
docking, while refueling for example.
1. Mooring cleats
CAUTION: Never use mooring cleats
to pull or lift the watercraft.
22) Footboard
User’s feet should rest on the footboard
when riding.
23) Boarding Pads
Provide a cushioned surface for the
knees when boarding from rear of wa-
tercraft.
24) Boarding Platform
Provides a large surface for easier board-
ing from rear of watercraft.
25) Boarding Step
A convenient step to help reboarding
the watercraft.
1. Boarding step
F00L0EY
1
1
F18L0RY
F18L0SY
1
F18L0IY
1
smo2002-003_a.book Page 38 Friday, October 12, 2001 2:04 PM

SeaDoo GTX 4-TEC Specifications

General

Manufacturer	Sea-Doo
Model	GTX 4-TEC
Category	Personal Watercraft
Displacement	1494 cc
Horsepower	155 hp
Fuel Type	Gasoline
Cooling	Closed-Loop Cooling System
Seating Capacity	3
Engine	4-TEC
Fuel Capacity	15.9 US gal
Width	48.0 inches
Length	130 in (330 cm)