SeaDoo GTX 4-TEC User Manual

51
1. Shift lever in neutral position
1. Reverse gate in middle position
To obtain reverse, pull shift lever com-
pletely. The reverse gate will be in down-
ward position, directing all the thrust to-
ward the front of the watercraft.
1. Shift lever in reverse position
1. Reverse gate in downward position
NOTE: To obtain maximum efficiency
and control from the reverse, increase
engine speed to slightly above idle.
Too much RPM will create water tur-
bulence and reduce reverse efficiency.
In reverse position, turn the handlebar
in the same direction that you want to
move the rear of the watercraft.
For example, to steer the rear of the wa-
tercraft to the left side, turn the handle-
bar to the left side.
F18J02Y
1
F18J0AY
1
F18J03Y
1
1
F18J07Y
F18J08Y
smo2002-003_a.book Page 51 Friday, October 12, 2001 2:04 PM

SeaDoo GTX 4-TEC Specifications

General

Manufacturer	Sea-Doo
Model	GTX 4-TEC
Category	Personal Watercraft
Displacement	1494 cc
Horsepower	155 hp
Fuel Type	Gasoline
Cooling	Closed-Loop Cooling System
Seating Capacity	3
Engine	4-TEC
Fuel Capacity	15.9 US gal
Width	48.0 inches
Length	130 in (330 cm)