SeaDoo GTX 4-TEC User Manual

68
NOTE: Some items are included in the PRE-OPERATION CHECKS and not nec-
essarily repeated in this chart.
D: Dealer
O: Operator
➀ In salt water use.
➁ These items have to be initially checked after 25 hours. Thereafter, servicing
to be made as specified in this chart.
➂ Daily flushing in salt water or foul water use.
➃ Every 200 hours or 2 years.
➄ Emission-related component.
➅ Replace after the vehicle completed 100 hours of use or 2 years.
➆ Replace after the vehicle completed 100 hours of use, not every year.
DESCRIPTION
FREQUENCY
FIRST 10 HOURS EVERY 25 HOURS OR 3 MONTHS EVERY 50 HOURS OR 6 MONTHS EVERY 100 HOURS OR 1 YEAR TO BE PERFORMED BY
O.P.A.S.
SYSTEM
Check O.P.A.S. system operation and
condition including filter
✔✔D
PROPULSION
SYSTEM
Drive shaft protection boot inspection and
lubrication
✔➁ D
Shifter system/cable adjustment ✔✔D
Drive shaft rubber bumper replacement ✔➆ D
Impeller shaft seal, sleeve and O-ring
replacement
➅ D
Impeller condition and impeller/wear ring
clearance
✔➁ D
Water intake grate condition ✔➁ O
Ride plate inspection including coolant leak ✔✔D
Visual inspection of drive shaft/hull sealing
system
✔✔D
HULL AND
BODY
Bailer pick-ups, check for obstructions ✔✔O
Hull condition ✔✔O
smo2002-003b.fm Page 68 Thursday, December 6, 2001 1:54 PM

SeaDoo GTX 4-TEC Specifications

General

Manufacturer	Sea-Doo
Model	GTX 4-TEC
Category	Personal Watercraft
Displacement	1494 cc
Horsepower	155 hp
Fuel Type	Gasoline
Cooling	Closed-Loop Cooling System
Seating Capacity	3
Engine	4-TEC
Fuel Capacity	15.9 US gal
Width	48.0 inches
Length	130 in (330 cm)