Seaga INF4C - Setting Individual Item Prices; Coupon Programming and Usage

18Revision 2.EL950 1.3.1074C 18.6
SELECTION
STEP DISPLAY
1 Press Service Mode Buon Motor Count or Error Code **
2 Press 1 for Price Program Price Program
Row: -- $--.--
3 Press 3 for Row Selecon: -- $--.--
*-Exit, no change
Use keypad to choose Row. Row: (New Row and Price)
4 Use the keypad to choose
one Selecon.
Use number keys on the
keypad to set new price,
including cents.
Selecon: (New Selecon and
Price)
*-Exit, no change #-Save
5 Press * two mes to exit to
Sales Mode
Price Program
COUPON
IMPORTANT: This opon requires a programmed validator. Up to ve dierent coupon values can be set. In sales
mode, once a coupon is accepted, no further coupons will be accepted unl a successful vend has been made. If
no value is set, coupons will be shown as free vends. If using both coupons and tokens, there are only ve selecon
combinaons available. For example, if Coupon1 is set for “All” items, Token1 is also set for “All” items.
STEP DISPLAY
1 Press Service Mode Buon Motor Count or Error Code **
2 Press 1 for Price Program Price Program
3 Press 4 for Coupons Coupons *-Exit, no change
4 Press 1 for Coupon1 (or corresponding
number for addional coupons, up to
Coupon5)
Coupon1 *-Exit, no change #-Save
5 Press 1 for All Items All Items (Current Seng) *-Exit, no change 1-Edit
6 Press 1 to toggle On/O All Items (Choice Flashing) *-Exit, no change #-Save
7 Press # to Save the new seng All Items (New Seng) *-Exit, no change #-Save
8 Press * to return to Coupon1 Coupon1
9 Press 4 to enter Coupon Value menu Coupon1: $0.00 *-Exit, no change #-Edit
10 Press # to edit Coupon1 value Coupon1: $0.00 *-Exit/Del #-Save
11 Enter Coupon1 value Coupon1: $0.00 *-Exit, no change #-Save
12 Press # to Save the Coupon1 Value
seng
Coupon1: $(New Value) *-Exit, no change #-Save
13 Press * two mes to connue to Cou-
pon2 – 5 or press * four mes to exit.
Price Program