Seaga INF4C - Page 19

19Revision 2.EL950 1.3.1074C 18.6
COUPON BY ROW
STEP DISPLAY
1 Press Service Mode Buon Motor Count or Error Code **
2 Press 1 for Price Program Price Program
3 Press 4 for Coupons Coupons *-Exit, no change
4 Press 1 for Coupon1 (or corresponding number for
addional coupons, up to Coupon5)
Coupon1 *-Exit, no change #-Save
5 Press 1 for All Items to verify O All Items (Current Seng) *-Exit, no
change #-Save
6 Press 1 to toggle On/O if necessary All Items (Choice Flashing) *-Exit, no
change #-Save
7 Press # to Save the new seng to O if necessary All Items (New Seng) *-Exit, no change
#-Save
8 Press * to return to Coupon1 Coupon1
9 Press 2 to enter a Row Number Row: -- *-Exit
10 Enter Row Number Row: XX (Current Seng) *-Exit/Del
#-Edit
11 Press 1 to toggle Row On/O Row: XX (Choice Flashing) *-Exit, no
change #-Save
12 Press # to save the seng Row: XX (New Seng) *-Exit, no change
#-Edit
13 Press * twice to return to the Coupon1 menu Coupon1
14 Press 4 to enter Coupon Value menu Coupon1: $0.00 *-Exit, no change #-Edit
15 Press # to edit Coupon1 value Coupon1: $0.00 *-Exit, no change #-Save
16 Enter Coupon1 value Coupon1: $0.00 *-Exit, no change #-Save
17 Press # to Save the Coupon1 Value seng Coupon1: $(New Value) *-Exit, no change
#-Save
18 Press * two mes to connue to Coupon2 – 5 or
press * ve mes to exit.
Price Program