Seaga INF4C - Token Value Programming

21Revision 2.EL950 1.3.1074C 18.6
TOKEN BY ROW
TOKEN
IMPORTANT: This opon requires a programmed changer and allows you to set the value of tokens accepted.
Note: If Space to Sales Whole Machine is On and you are seng Tokens by Row, the Row must be set to Row 1. If
using both coupons and tokens, there are only ve selecon combinaons available. For example, if Coupon1 is set
for “All” items, Token1 is also set for “All” items.
STEP DISPLAY
1 Press Service Mode Buon Motor Count or Error Code **
2 Press 1 for Price Program Price Program
3 Press 5 for Tokens Tokens *-Exit, no change
4 Press 1 for Token1 (or corresponding number
for addional tokens, up to Token5)
Token1 *-Exit, no change #-Save
5 Press 1 for All Items All Items (Current Seng) *-Exit, no change
1-Edit
6 Press 1 to toggle On/O All Items (Choice Flashing) *-Exit, no change
#-Save
7 Press # to Save the new seng All Items (New Seng) *-Exit, no change #-Save
8 Press * to return to Token1 Token1
9 Press 4 to enter Token Value menu Token1: $0.00 *-Exit, no change #-Edit
10 Press # to edit Token1 value Token1: $0.00 *-Exit, no change #-Save
11 Enter Token1 value Token1: $0.00 *-Exit, no change #-Save
12 Press # to Save the Token1 Value seng Token1: $(New Value) *-Exit, no change #-Save
13 Press * two mes to connue to Token2 – 5 or
press * four mes to exit.
Price Program
STEP DISPLAY
1. Press Service Mode Buon Motor Count or Error Code **
2. Press 1 for Price Program Price Program
3. Press 5 for Tokens Tokens *-Exit, no change
4. Press 1 for Token1 (or corresponding number for addi-
onal tokens, up to Token5)
Token1 *-Exit, no change #-Save
5. Press 1 for All Items to verify O All Items (Current Seng) *-Exit, no change 1-edit
6. Press 1 to toggle On/O if necessary All Items (Choice Flashing) *-Exit, no change 1-edit
7. Press # to Save the new seng to O if necessary All Items (New Seng) *-Exit, no change #-Save
8. Press * to return to Token1 Token1
9. Press 2 to enter a Row Number Row: -- *-Exit
10. Enter Row Number Row: XX (Current Seng) *-Exit, no change #-Edit
11. Press 1 to toggle Row On/O Row: XX (Choice Flashing) *-Exit/del #-Save
12. Press # to save the seng Row: XX (New Seng) *-Exit, no change #-Edit
13. Press * twice to return to the Token1 menu Token1