Seaga INF4C - Setting Up Product Combos

22Revision 2.EL950 1.3.1074C 18.6
COMBOS
STEP DISPLAY
1 Press Service Mode Buon Motor Count or Error Code **
2 Press 1 for Price Program Price Program
3 Press 6 for Combo Combo
4 Press 1 for Combo1 (or corresponding number for addi-
onal combos, up to Combo5)
Combo1: --- $0.00 *-Exit, no change
5 Enter First Combo Item Number and Price. Press # to Save.
Press 1 to enter the Selecon Ranges.
Combo1: ### $-.-- *-Exit, no change
#-Edit 1- Next
6 Enter Range number, then enter selecon numbers Note:
A Range represents the rst selecon(s) in the combo. In
our example, the range would be selecon 110 to 110. A
second range would be set for selecon 131 to 131 and the
third range for 142 to 142. This would complete the three
item Combo.
Range1: --- to --- *-Exit, no change
#-Save
7 Press 1 to set the next Range. Range2: ### to ### *-Exit, no change
1-Next
8 To connue seng Ranges, repeat step 6 and 7. There are
5 ranges available per combo. When nished press * ve
mes to exit.
Price Program

1 Press Service Mode Buon Motor Count or Error Code **
2 Press 1 for Price Program Price Program
3 Press 6 for Combo menu Combo
4 Press 1 for Combo1 menu Combo1: ### $(Price) *-Exit, no change
#-Edit 1- Next
5 Press # to edit the Combo Combo1: ### $(Price) *-Exit/del #-OK
6 Press * three mes to delete the selecon number Combo1: ### $(Price) *-Exit, no change
#-Save
7 Press # to save the seng Combo1: -- $0.00 *-del #-OK
8 Press # ve items to exit. Price Program