Seaga INF4C - Auto-Reinstate Feature Configuration; Space to Sales (StS) Feature

27Revision 2.EL950 1.3.1074C 18.6
AUTOREINSTATE
This feature reinstates a selecon aer a vend failure, per the Vigilant vend sensor system. Normally, when
an empty selecon is detected during an aempted vend, that selecon is recorded as inoperave and
requires reseng before it can be vended again. Note: AutoReinstate aects both the host machine and all
aached satellites.

Space to Sales (or StS) is a feature that rotates products so that First In First Out (FIFO) is assured and a
popular item isn’t sold out. This feature is only recommended for your beverage area, as the live display in
the snack secon would make product rotaon confusing for your customer.
However, if you have a popular brand of water that keeps selling out before you can restock, it may be
useful to set StS for two selecons to work in tandem, make more sales by having fresh product readily
available in a larger capacity. As an example, loading 16 oz. boled water in selecons 150 and 151.
By using Space to Sales to join selecons 150 and 151 and loading 16 oz. water boles in both columns,
you have insured that this popular item is dispensing from both selecons evenly, have allocated more
capacity to a best seller to prevent sold out status and made your locaon more sased with your service.
STEP DISPLAY
1 Press Service Mode Buon Motor Count or Error Code **
2 Press 4 for Conguraon Conguraon
3 Press 7 for Auto Reinstate Auto reinstate
5 Press 1 to change All Items All Items ON/OFF *-Exit, no change
6 Press 2 to change Row Row – Use keypad to select row ON/OFF
*-Exit, no change 2- Toggle On/O # to Save
7 Press 3 to change one Selecon Selecon – Use keypad to select row ON/OFF
*-Exit, no change 3- Toggle On/O # to Save
12 Press * two mes to exit 0
STEP DISPLAY
1 Press Service Mode Buon Motor Count or Error Code **
2 Press 4 for Conguraon Conguraon
3 Press 8 for Space to Sales StS (Current seng) *-Exit, no change 8-Edit
4 Press 8 to toggle through opons StS O Whole Rows Half Rows By 2’s Whole Machine
Custom MZF/SZF Custom (See next menu item) With
your choice ashing, press # to Save *-Exit, no change
5 Press * two mes to exit 0.00